Testing / Certification

In our ISO 17025 accredited and NADCAP-MTL certified test laboratories, approximately 500,000 test orders are carried out annually according to 180 different accredited test methods. The central database for recording all test data, LISA-LIMS, has been in highly reliable use since 2003. In certification, around 50,000 acceptance test certificates are created annually on the basis of the test results from the companies and the test laboratories.

Prüfwesen und Zertifikate / Testing and Certificates

Chemical Laboratories

Karl Prattes

Karl Prattes

Head: Chemical Laboratories

Request


    No file uploaded.

    File type: PDF, JPG, PNG, ZIP

    (Maximum file upload size: 20MB)

    * Mandatory fields

    Our state-of-the-art chemical laboratories provide production with critical information for process control, product certification, and environmental monitoring. To determine the composition of metallic and non-metallic substances such as steel, non-ferrous alloys, input materials and by-products of stainless steel production, we use inorganic chemical analysis methods.

    Process Analytics and Solids Analysis

    Tasks: Analysis of solid samples with the aim of short response times with the highest precision and correctness at the same time.

    Methods: X-ray and spark spectrometry as well as combustion analysis and melt extraction.

    Wet Chemistry

    Tasks: Trace analysis for process samples as well as determination of the main and minor components of difficult matrices, supply of solids analysis with certified calibration samples and reference materials, special raw material and waste analyses, analysis of environmentally relevant samples.Methods: Classical wet chemical analysis methods in combination with state-of-the-art optical spectrometry, mass spectrometry and chromatography.

    Corrosion Testing

    Tasks: Corrosion investigation of steels and alloys.

    Absorption cooling, heat recovery heating and ventilation

    Methods: Various methods in accordance with international standards and specific regulations for testing resistance to generally ablative corrosion, intercrystalline corrosion, stress corrosion cracking, pitting corrosion – including electrochemical test methods.
    The heating energy supply of the new chemical laboratory will be ensured by decoupled industrial waste heat in the plant and at the same time the heating power requirement for the ambient air of the laboratory processes will be significantly reduced by a closed-loop system from the laboratory exhaust air.
    In addition, cooling will be provided by an absorption refrigeration system with a cooling capacity of around 850 kW and cooling towers on the roof. Existing process waste heat potential from the plant will also be utilised as expulsion energy.
    ‘This project is co-financed by the European Regional Development Fund’

    Testing Laboratories

    Raphael Beck

    Raphael Beck

    Head: Mechanical Laboratory

    Request


      No file uploaded.

      File type: PDF, JPG, PNG, ZIP

      (Maximum file upload size: 20MB)

      * Mandatory fields

      Mechanical-Technological Testing Laboratories and Materials Testing

      Tasks: Determination of mechanical parameters.
      Methods: Execution of tensile, hot tensile, notched impact and creep tests as well as hardness tests according to Brinell, Rockwell and Vickers on steel and non-ferrous alloys in accordance with international standards and regulations.

      Metallography

      Tasks: Determination of microstructure parameters on samples and components – including sample preparation, etching and photo documentation – according to test standards and customer specifications.
      Methods: Determination of structure, grain size and degree of purity, decarburization, etc.

      Heat treatment

      Tasks: Heat treatment of samples and components according to the requirements of our customers.
      Methods: Heating in system-monitored laboratory furnaces with air atmosphere and in vacuum, supplemented by salt baths and deep-freeze treatments for residual austenite conversion. Water and oil are available as quenching media.

      Metallurgical & Physical Laboratory

      Tasks: Execution of hot forming simulations, differential thermal analyses and dilatometric investigations, heat treatment and forming simulation, creation of ZTU and ZTA diagrams, deep-freeze simulations, determination of linear expansion coefficients and investigation of recrystallization and precipitation processes.
      Methods: Material and failure analyses of microstructure samples and fractures as well as qualitative analysis of non-metallic inclusions with scanning electron microscopes, measurement of physical properties of materials such as testing of soft magnetic materials, strain and stress analyses using strain gauge technology as well as X-ray diffraction analyses (residual austenite, phase analysis).

      Certifications

      In the following sections you will find all certificates that are valid for the production site Kapfenberg – voestalpine BÖHLER Edelstahl GmbH & Co KG

      Contacts

      Wolfgang Schützenhöfer

      Wolfgang Schützenhöfer

      Head: Testing and certificates

      Request


        No file uploaded.

        File type: PDF, JPG, PNG, ZIP

        (Maximum file upload size: 20MB)

        * Mandatory fields